Using QR codes and seals correctly
Certificates and seals in the Eucerta registry carry QR codes. Scanning one shows at once whether a certificate or seal is genuine and valid. For this to work reliably, QR codes must be large enough and used unchanged.
QR code on the certificate (PDF)
Placed into the certificate PDF when it is recorded; it leads to the certificate's verification page: company, issuer, validity, status. The stamped PDF is also secured with a blockchain timestamp.
QR code on the seal
Every seal is extended on its right by a QR code, the certificate number (CertID) and a short link (eucerta.org/s/…). Scanning checks exactly this seal: does it belong to the certificate, is it still valid, or has it been withdrawn?
The normal phone camera is enough, no app needed. The code opens the verification page in the Eucerta registry with a clear result:
- Valid / seal is genuine: certificate and seal are registered and currently valid.
- Seal registered, certificate not valid: the certificate has expired or been revoked.
- Seal withdrawn: the seal may no longer be used.
- Seal unknown: this seal is not registered for the certificate — be careful.
Only verification pages on eucerta.org are genuine. If a code leads to another address, it is not ours.
A QR code consists of small squares (modules). For phone cameras to read it reliably, each module needs at least 3 pixels on screen and at least 0.4 mm in print. The seal QR with short link has 25×25 modules, older seals with a long link 41×41.
| Use | Digital (website, e-mail, presentation) | |
|---|---|---|
| Seal with QR (short link) | at least 180 px high | at least 16 mm high (QR ≥ 10 mm) |
| Seal with QR (older long link) | at least 200 px high — better regenerate with short link | at least 26 mm high |
| QR code on the certificate PDF | show the PDF at original size, not scaled down | QR at least 15 mm (print A4 at original size) |
SVG is the best choice for websites: sharp at any size. Download PNG only in the offered sizes and do not scale it up. On high-resolution (retina) screens use the double PNG size.
- Use seals unchanged: seal, QR code, CertID and short link belong together.
- On websites use the SVG file and link the seal to the verification page (embed code in the dashboard).
- Keep the white area around the QR code (quiet zone) free and do not crop it.
- Keep the aspect ratio: do not squeeze or stretch.
- Place on a calm, light background; the QR code stays dark on white.
- Respect the minimum sizes; if in doubt, larger.
- Remove expired or withdrawn seals.
- Create your own QR codes or replace the QR code — only the code from the registry leads to the check.
- Change colours, invert the QR code or put logos into it.
- Use screenshots or heavily compressed images (blurred modules).
- Enlarge small PNG files.
- Use a certificate's seal for other services or companies.
- Use Micro QR or rMQR codes (see below).
Micro QR and rectangular rMQR codes would be a little smaller, but the iPhone camera and many Android cameras cannot read them. Anyone must be able to check a seal with their own phone. So we use normal QR codes and make them small with a short link: 25×25 instead of 41×41 modules.
Want to verify a certificate or seal? Go to verification